Blackhawk Entry-Level XDS100 JTAG Emulators

Which XDS100 is Right For You?
Blackhawk Offers XDS100 v1 and v2 Products!
v1	v2

Blackhawk USB100v1 Product Page	Blackhawk USB100v2 (model D) Product Page
	The previous v2 model can be found here.
Here is the Support Information You Need to Know. Blackhawk has the FREE UPGRADE ANSWER! If you like all the capabilities and pricing of the new XDS100 from Texas Instruments, but feel left out because you are still locked-in to Code Composer Studio v3.3, Blackhawk has the answer. Whether you are on a project that requires CCS v3.3 or you have not yet made the transistion to CCS v4, Blackhawk can put your mind at ease. Our new XDS100v2 model D (BH-USB-100v2D) has the ability to work with either CCS v3.3 or v4. So you can continue to use CCS v3.3 and when you are ready to switch to v4, your Blackhawk XDS100 hardware will do that too. Blackhawk has removed the decision from the purchasing process. Buy the Blackhawk USB100v2D and use it with CCS v3.3 or CCS v4. Simple! And remember, CCS v4 for the XDS100v1/v2 hardware is free too! The Blackhawk USB100v2 model D is available from a world wide network of industry resellers for a Manufacturers Suggested Retail Price of $99. Check the TI XDS100 Wiki Page for a complete list of supported devices. CCS v3.3 NOTE: XDS100v2-class products are design to be used with CCS v4 and later. You cannot just use any XDS100v2 product with CCS v3.3. Please contact your XDS100 vendor for more details.

CCStudio and Device Support

The following list compares software and device support for the XDS100 reference designs by TI. For a comparison of emulator product offerings, please see the Blackhawk emulator comparison page.

	CCStudio v3.3 ^{Note 1}		CCStudio v4
Device Support	XDS100v1	XDS100v2D	XDS100v1	XDS100v2D
TMS320C28x		NO
TMS320C674x		NO
TMS320C54x	NO	NO
TMS320C55x	NO	NO
TMS320C64x+	NO	NO
ARM 9	NO	NO	NO
ARM Cortex A8	NO	NO	NO
ARM Cortex R4	NO	NO	NO
ARM Cortex M3 (including Stellaris Cortex M3)	NO	NO	NO	NO

For the latest, up to date information, please visit the TI XDS100 Wiki Page.

Supported Features

For complete list of features, please visit the individual Blackhawk XDS100 product pages or the TI XDS100 Wiki Page using one of these links below.

Blackhawk USB100v1 Page

Blackhawk USB100v2 Page

TI XDS100 Wiki Page

	XDS100v1		XDS100v2
Feature	TI Reference Design	Blackhawk USB100v1	TI Reference Design	Blackhawk USB100v2D
	Common TI Reference Design Features
1.8v and 3.3v IOs
JTAG Reset boot-modes (using EMU0/1 + nTRST)
Power-On-Reset boot-modes (using EMU0/1 + TVD)
Wait-In-Reset modes (using EMU0/1 + nTRST)
	Other Features
CCStudio v3.3			NO	NO ^{Note 3}
CCStudio v4
USB v1.1 (full speed)
USB 2.0 (high-speed)	NO
Standard TI 14-pin target connection
Compact TI 20-pin target connection	NO ^{Note 2}
Power LED	NO	NO

The Bottom Line

The USB100v2 model D + CCStudio v4 is the way to go. And if you have a CCS v3.3 requirement, Blackhawk can support that too. Yes, the USB100v2D can work with both IDE's - no choice to make.

CCStudio v4 is available from TI free-of-charge for use with an XDS100 controller. So, for under one hundred dollars, you can have an entry level debug setup (IDE + Emulator). For v4 download information go to: http://tiexpressdsp.com/index.php/CCSv4#Downloads

Note 1:

Blackhawk has added support for CCS v3.3 with our latest USB100v2 Model D unit.

If you are using CCStudio v3.3, but not one of the supported devices, you can update to CCSv4 for the XDS100 (v1 or v2) at no cost.

TI provides XDS100 support under CCS v4 free of charge (registration/download of software is required). Go to the following link for more CCSv4 information: http://tiexpressdsp.com/index.php/CCSv4#Downloads

Note 2:

The TI reference design for the XDS100v1 includes support for this feature but no one offers a product with this feature, except Blackhawk.

Note 3:

Blackhawk can support both CCS v3.3 and CCS v4 and later with our latest USB100v2 Model D unit.