|
|
|
The Blackhawk USB2000 Controller is a small and lightweight controller designed
for the unique requirements of the Texas Instruments TMS320C2000 DSP developers.
Built upon the advanced technology of the highly-popular USB510, this 3rd generation
controller achieves the cost/performance balance required by the C2000 development
community. The compact controller pod requires no external power source. Power is
derived directly from the PC’s USB port.
The controller supports the standard 14-pin JTAG header and voltage ranges from
3.3 to 5.0v. The USB host port permits communications with the host PC and the bi-color
status LED gives visual indication of the controllers state.
A free add-on to the USB2000 Controller is the Blackhawk FlashBurn utility. This
scriptable utility follows the freely available Texas Instruments API and algorithms
for programming C2000 devices with on-chip flash. BHFlashBurn integrates seamlessly
with the Flash API allowing the ability to Clear, Erase and Program on-chip flash
on the target device.
Blackhawk also has available an optional Isolation Adapter
which protects from ground loop voltage, harsh environments and new, untested designs.
Supports 3.3-5.0v targets with TI 14-pin connections.
Blackhawk JTAG Emulators are available from a world wide network of
industry resellers.
|
|
FEATURES
|
BENEFITS
|
- Low-Cost XDS510™-class Controller
- Plug n’ Play USB Host Interface.
- Bus powered, no external power required.
- Supports TI C2000 Digital Signal Processors:
- F283xF281xF280xF280xxLF240x
- 3.3/5.0 volt device I/O support.
- Bi-Color Status LED (red/green).
- Standard 14-pin JTAG Header Connector.
- Blackhawk FlashBurn utility add-on.
- Optional Isolation Adapter
available.
|
- Inexpensive Alternative
- Easy to Install
- Compact, simple and reliable
- Will not need to be replaced for updated DSPs
- Visual Indicator shows status continuously
-
Add-on's and Options for a small investment
|
SYSTEM REQUIREMENTS
AND COMPATIBILITY
|
|
|
Operating Systems
|
|
TI Device Support
|
- Windows® 2000/XP/Vista/7 (32-bit)
- Windows® XP/Vista/7 (64-bit)
|
|
| Supports C2000 and derivative devices only |
| Delfino™ |
Piccolo™ |
C2000™ |
| [SHOW ALL DEVICES] |
|
|
Development Environments
|
|
Other Requirements
|
- Code Composer Studio v3.3
- Code Composer Studio v4.0, v4.1 (eclipse)
|
|
- Available USB port
- CD-ROM drive for driver installation
- Target HW with TI 14-pin JTAG header or appropriate pin converter
|
|
|
IN THE BOX
|
ORDERING INFORMATION
|
- JTAG Emulator
- 6' (2m) USB Cable
- Installation CD
- Quick Start Guide
- Product Warranty Terms and Conditions
|
|
Product:
|
Blackhawk™ USB2000 Controller
|
|
Part No.:
|
BH-USB-2000 |
|
Availability:
|
Shipping since 1Q08 |
|
|
PRODUCT REVISION INFORMATION
|
OPTIONS & ADD-ONS
|
|
Current Revision:
|
D
|
|
*Serial Numbers:
|
MDxxxx
MCxxxx
|
* Second letter in serial number is revision.
|
|
|
APPLICATION AREAS
|
SUPPORT & DOWNLOADS
|
|
Audio, Automotive, Broadband, Communications, Telecom, Computers & Peripherals,
Consumer Electronics, Industrial, Medical, Military, Security, Video and Imaging,
Wireless.
|
|