Blackhawk Advanced USB100 JTAG Emulator features and specifications page

Description	Features	Benefits
System Req's	Application Areas	In the Box
Ordering Info	Product Revision	Options & Add-Ons
Compare Models	Support/Downloads	Datasheet
	Where To Buy

DESCRIPTION

The Blackhawk™ USB100 (v1.0) controller is a very low-cost controller for basic debugging of Texas Instruments DSPs. Requiring no external power source, the USB100 can support most of the basic features of higher priced emulators and requires no additional drivers when installed using CCS v3.3 SR12 and CCS v3.3 for C2000 DSK Version (version 3.3.81.28 or newer).

The USB100 is a TI XDS100-compatible emulator fully supported under CCS v4 and future Texas Instruments roadmap software development environments. Blackhawk’s USB100 provides additional features and performance not found in other XDS100 emulators. The USB100 provides for faster code downloads and assembly code stepping in that the USB100 uses a high-speed USB2.0 (480 Mb/s) port instead of slower USB1.x (12 Mb/s) implementations.

Measuring just 2.75”L x 0.80”W x 0.65”H (7.0cm x 2.0cm x 1.5cm) the Blackhawk USB100 is the smallest and most compact emulation product from a US manufacturer and is fully assembled and tested in the USA. It will support 1.8-3.3v targets with standard TI 14-pin connections and also supports the Texas Instruments compact 20-pin emulation header (cTI).

Additionally, with an optional 20cTI to 20ARM connector (available from Blackhawk), the USB100 can connect to 20-pin ARM Multi-Ice platforms. The USB100 Controller is also compatible with Code Composer Studio™ Flash-burner utility.

FEATURES

BENEFITS

Very low cost XDS100™-class Controller
HIGH-SPEED USB 2.0 (480Mb/s) Plug n' Play Host Interface
1.8/3.3 volt device I/O support
Standard 2x7 TI and 2x10 cTI JTAG headers
Code Composer Studio v3.3 and v4 support
Online Support from TI. See web link: www.tiexpressdsp.com/index.php/XDS100

Easy on your budget
Simple to install and use
No drivers are required
Meets the needs of most projects

SYSTEM REQUIREMENTS AND COMPATIBILITY

Operating Systems

TI Device Support

Windows® 2000/XP/Vista/7 (32-bit)
Windows® XP/Vista/7 (64-bit)

CCStudio v3.3
TMS320C28x	TMS320C674X
CCStudio v4
TMS320C28x	TMS320C54x
TMS320C55x	TMS320C674x
[SHOW ALL DEVICES] (for CCS v4)

For the latest, up-to-date list, please visit the
TI XDS100 Wiki page.

Development Environments

Other Requirements

Code Composer Studio v4.0, v4.1 (eclipse)
Code Composer Studio v3.3 SR12 or higher

Available USB port
Target HW with TI 14-pin or 20-pin cTI JTAG header or appropriate pin converter

IN THE BOX

ORDERING INFORMATION

USB100v1 JTAG Emulator
USB Cable
Quick Start Guide

Product:	Blackhawk™ USB100 JTAG Emulator
Part No.:	BH-USB-100
Availability:	Shipping since 2Q09

PRODUCT REVISION INFORMATION

OPTIONS & ADD-ONS

Current Revision:	B
*Serial Numbers:	NBxxxx

* Second letter in serial number is revision.

APPLICATION AREAS

SUPPORT & DOWNLOADS

Audio, Automotive, Broadband, Communications, Telecom, Computers & Peripherals, Consumer Electronics, Industrial, Medical, Military, Security, Video and Imaging, Wireless.